logo google icon facebook iconyoutube icon favorite icon

Pull Type Spreaders

Belt Loaders

Floaters

Sprayers

Spreaders - Pull Type

Spreaders - Self Propelled

Tenders

 

Brochures and Specs

pdf Adams HLS-2-LP Brochure

pdf Adams HLS-3-LP Brochure

pdf Adams HLS-3 Brochure

pdf Adams 5 Ton Brochure

pdf Adams HLS-MCH-6 Brochure

 
Adams logo

MADE IN USA

 

      
  • Adams HLS 2 LP
  • Adams HLS 3 LP
  • Adams HLS 3
  • Adams 5 Ton
  • Adams HLS-MHC-6
  • Valmar Airflo 7600
  • Valmar Airflo 5500
  • Valmar 245
  • Valmar ST-6

ADAMS HLS-2-LP
(GYPSUM/LIME/FERTILIZER)
This is the same unit as our best- selling combo unit; however, this spreader is designed with a special low profile axle and smaller tires, which lowers the maximum height of the unit to 56” off of the ground. The Adams HLS-2-LP is specifically designed for orchards and other application needs that require a low-profile design.

STANDARD FEATURES & SPECIFICATIONS:hls 2 lp
• 60 cubic feet
• 304 stainless steel hopper construction
• Single axle (lowered) – 2 wheel
• Powdered coated frame - black in color
• 14.5 x 16.1 10 ply tires
• 8-bolt hubs
• 16” wide 304 stainless steel mesh conveyor chain
• Dual hydraulic spinners - 24” (interchangeable attachment)
• Special lowered hopper
• Mild steel hopper screen
• Overall width 84”
• Heavy duty 4 X 4 jack
• Adjustable clevis type hitch
• Detachable rear fan drive unit
• Top mounted hydraulic motors
• Adjustable material distribution chute
• Hydraulic engaging steel wheel (operates the drag chain)
• Tractor hydraulic package requires (4 hoses/2 remotes)
• Stake pocket and hopper extensions included for more capacity – wood not included
OPTIONAL FEATURES:
• Banding diverter (interchangeable attachment)
• Belt bander attachment -18” PVC belt, 10 gauge mild steel frame, dual hydraulic drive
motors, full length sealer strips, powder coat black paint (interchangeable attachment)
• Single remote kit
Drive sprocket shield

 

 

 

 

 

 

 

 

 

ADAMS HLS-3-LP
The Adams low profile combo spreader is the same as our popular HLS-3 model; however, the HLS-3-LP is 8” lower to accommodate orchards with height restrictions. The HLS-3-LP is a multi-functioning unit that allows for the application of Gypsum, Lime or Fertilizer. The combo spreader is designed for tractor hydraulics. The spinner assemblies on these units are designed as an attachment, which makes them easy to take on and off of the unit when other application needs are required. A custom designed conveyor belt banding unit and banding diverter are available as options, which make this one of the most diverse spreaders on the market today.

STANDARD FEATURES & SPECIFICATIONS:hls 3 lp
• 84 cubic feet capacity
• 304 stainless steel hopper construction
• Single axle – 2 wheel
• 14.5/75-16.1 tires
• 10-bolt hubs
• 16” wide 304 stainless steel mesh conveyor chain
• Dual hydraulic spinners - 24” (interchangeable attachment)
• Hopper dimensions: width 72“ x length 120” x height 58”
• Overall width 84”
• Heavy duty 4 X 4 jack
• Powder coated frame - black in color
• Adjustable clevis type hitch
• Adjustable material distribution chute
• Hydraulic engaging steel wheel (operates the drag chain)
• Tractor hydraulic package requires (4 hoses/2 remotes)
• Stake pocket and hopper extensions included for more capacity - wood not included
OPTIONAL FEATURES:
• Banding diverter (interchangeable attachment)
• Belt bander attachment -18” PVC belt, 10 gauge mild steel frame,
dual hydraulic drive motors, full length sealer strips, powder coated-black paint
• Single remote kit
• Drive sprocket shield

 

 

 

 

 

 

 

 

 

 

 

ADAMS HLS-3
The Adams combo spreader, specifically designed for Big W Sales, is a multi-functioning unit that allows for the application of Gypsum, Lime or Fertilizer. The combo spreader is designed for tractor hydraulics. The spinner assemblies on these units are designed as an attachment, which makes them easy to take on and off of the unit when other application needs are required. A custom designed conveyor belt banding unit and banding diverter are available as options, which make this one of the most diverse spreaders on the market today.

STANDARD FEATURES & SPECIFICATIONS:hls 3
• 84 cubic feet capacity
• 304 stainless steel hopper construction
• Single axle – 2 wheel
• 21.5 x 16.1 flotation turf tires
• 10-bolt hubs
• 16” wide 304 stainless steel mesh conveyor chain
• Dual hydraulic spinners - 24” (interchangeable attachment)
• Hopper dimensions: width 72“ x length 120” x height 66”
• Overall width 84”
• Heavy duty 4 X 4 jack
• Powder coated frame - black in color
• Adjustable clevis type hitch
• Adjustable material distribution chute
• Hydraulic engaging steel wheel (operates the drag chain)
• Tractor hydraulic package requires (4 hoses/2 remotes)
• Stake pocket and hopper extensions included for more capacity - wood not included
OPTIONAL FEATURES:
• Banding diverter (interchangeable attachment)
• Belt bander attachment -18” PVC belt, 10 gauge mild steel frame, dual hydraulic drive
motors, full length sealer strips, powder coat black paint (interchangeable attachment)
• Single remote kit
• Drive sprocket shield

 

 

 

 

 

 

 

 

 

 

ADAMS 5-TON FERTILIZER SPREADER
The Adams 5-ton, pull-type fertilizer spreader has a manual ground driven engagement assembly that makes it easy to use and operate. A PTO and hydraulic operated option are also available for those customers that prefer PTO or hydraulic operated spreaders.

STANDARD FEATURES & SPECIFICATIONS:5 ton
• 5-ton (180 cubic feet) capacity
• 304 stainless steel hopper construction
• 50 ft. Fertilizer spread pattern
• 30 ft. Lime spread pattern
• 16” 304 stainless steel mesh conveyor chain
• Twin 24” fans
• 12.5L x 15 flotation tires
• Hopper dimensions: width 104” length x 80” height x 83”
• Bolt-on hopper assembly
• Tandem axle – 4 wheel
• Heavy duty jack
• Clevis type hitch
• Dual spinners
• Ground drive
• Powder coated frame - black in color
• Tow safety chains
• 2” X 6” rectangular tube chassis construction
OPTIONAL FEATURES:
• PTO driven
• Hydraulic floor chain shutoff (PTO version only)
• All hydraulic option which includes hydraulic spinners with flow
control valve, hydraulic engaging wheel (operates the drag chain),
tractor hydraulic package
(4 hoses/2 remotes required), no PTO

 

 

 

 

 

 

 

 

 

 

 

 

ADAMS HLS-MHC-6
The Adams high clearance was designed for those application needs that require a unit with more ground clearance than the standard pull-type spreaders. This unit has a 30” ground clearance and has adjustable axles to fit either 60” or 80” rows. In addition, the Adams HLS-MHC spreader can be used to spread Gypsum, Lime, Fertilizer, or Compost. The spinner assemblies on the HLS-MHC units are designed as an attachment, which makes them easy to take on and off when other application needs are required. A custom designed conveyor belt banding unit and banding diverter are available as options, which make this one of the most diverse spreaders on the market today.

STANDARD FEATURES & SPECIFICATIONS:hls mhc 6
• 6 ton capacity (200 cubic feet)
• 304 stainless steel hopper construction
• Powder coated frame - black in color
• Single axle – 2 wheel
• 50 ft. Fertilizer spread pattern
• 30 ft. Lime spread pattern
• 16” wide 304 stainless steel mesh conveyor chain
• Dual hydraulic spinners - 24” (interchangeable attachment)
• 11.25 x 28 wheels/tires
• 10-bolt, 12,000 lb. hubs
• Hopper dimensions: width 72“ x length 120” x height 66”
• Overall width 84”
• 30” ground clearance
• Heavy duty 4 X 4 jack
• Adjustable clevis type hitch
• Adjustable material distribution chute
• Hydraulic engaging steel wheel (operates the drag chain)
• Tractor hydraulic package required (4 hoses/2 remotes)
OPTIONAL FEATURES:
• Banding diverter (interchangeable attachment)
• Belt bander attachment -18” PVC belt,
10 gauge mild steel frame, dual hydraulic drive motors, full length sealer strips,
powder coat black paint
• Single remote kit

 

 

 

 

 

 

 

 

 

Airflo 7600 Specifications7600 airflo
Hopper

  • 230 cu. ft. (200 cu. ft. and 30 cu. ft. if second metering system is used)
  • 409 stainless steel with 2 component epoxy primer and 2 component cross linked acrylic top coat paint system
  • Roll tarp installed

Booms

  • 60 ft, 57 ft. or 54 ft. spread width
  • Rubber torsion boom suspension
  • 304 stainless steel construction
  • Break away tips
  • 3 in. diameter tubes (6 per side)
  • 2 deflectors per tube

Metering

  • (2) 12 in., stainless steel conveyor chains
  • 15:1 final drive gearbox ratio
  • Ground drive metering
    • One way clutch allows you to back up with metering drive engaged
    • 1.5 ratio gearbox equipped with reversible gears provides an additional 2X gear range
    • 30 speed gearbox with 7% between settings
    • Oil bath gearboxes
  • Hydraulic metering drive options
    • A basic drive supplied with hydraulic motor only for completion by customer with system of their choice. Does not include radar, servo valve, encoders, controller/monitor, cables etc.
    • A Rawson AccuRate® Drive complete with hydraulic lines that is compatible with many of today’s GPS systems
    • A complete Raven System such as Viper Pro®, Envizio Pro® or SCS 660®

Fan

  • 17 in. impeller operates at 4700 RPM
  • 9 in. outlet
  • PTO fan drive
    • 1000 RPM CV, 13⁄8 in. 21 spline driveline
    • 1.5 ratio PTO gearbox
    • 4 band belt with tightener
    • 14:4.5 pulley ratio
  • Optional hydraulic fan drive
    • 28 CC motor, direct drive
    • Requires 35 GPM operating at 2225 PSI
    • 38.5 in. water column manifold pressure
    • 3/4 in. hydraulic lines
    • 3/4 in. couplers recommended
    • Case drain required

Hydraulics

  • 3 outlets required to operate standard functions
    • Boom fold and lock
    • Engage metering drive wheel
    • Operate half shut off on right boom
  • Requires additional remotes for optional hydraulic drives for fan and metering

Chassis

  • 72-120 in. adjustable axle
  • Single 3.5 in. axle with 10 bolt hub
  • 12.4-38 (320/85), 23.1-26 R1 or R3, 28L-26 (750/65) R1 tire sizes available

Second Metering System

  • 30 cu. ft. hopper (moveable panel allows you to utilize either entire 230 cu. ft. hopper or 30 cu. ft./200 cu. ft. split)
  • (2) 12 in., 28 groove metering rollers
  • 60 speed metering gearbox with 5% between settings
  • In-cab electric clutch control with 1⁄2 shut off on either side

Dimensions/Shipping Information

  • Total weight 7000 lb.
    • Transport: Hitch 1040 lb., Axle 5960 lb.
    • Field: Hitch 1360 lb., Axle 5640 lb.
  • 9 ft. 10 in. Transport width
  • 11 ft. 6 in. Transport height

Airflo 5500 Pull-Type Specifications5500 airflo
Hopper

  • 170 cu. ft.
  • 1 piece, 409 stainless steel construction with 2 component epoxy primer and 2 component cross linked acrylic top coat paint system
  • Hopper bottom shut-off slide panels
  • Roll tarp installed

Booms

  • Available in 40 ft. or 36 ft. spread
  • 304 stainless steel construction
  • Break away boom tips
  • 2.5 in. diameter tubes
  • 6 deflectors per side
  • Manual fold
  • Self levelling

Metering System

  • 304 stainless metering bottoms with 6 outlets per side
  • 304 stainless steel, self cleaning metering rollers
  • Manual half width shut-off on either side
  • Rates up to 500 lb./acre at 5 MPH down to 5 lb./acre with optional small seed and herbicide kit
  • Ground drive
    • Hydraulically engaged
    • 60 speed gearbox with 5% between settings
  • Hydraulic metering drive options
    • A basic drive supplied with hydraulic motor only for completion by customer with system of their choice – does not include radar, servo valve, encoders, controller/monitor, cables etc.
    • A Rawson AccuRate® Drive complete with hydraulic lines that is compatible with many of today’s GPS systems
    • A complete Raven System such as Viper Pro®, Envizio Pro® or SCS 660®

Fan

  • 20 in. impeller
  • 2-5 in. fan outlets
  • PTO fan drive
    • 1000 RPM CV driveline, 13⁄8 in. – 21T spline
    • 19:4.12 pulley drive ratio
    • 4 band belt with spring loaded idler tensioner
  • Optional hydraulic fan drive
    • 32 CC motor requires 23 GPM operating at 1885 PSI
    • 3/4 in. hydraulic lines
    • 3/4 in. couplers recommended
    • 30 in. water column manifold pressure
    • Case drain required
    • 6.9:4.12 pulley drive ratio

Hydraulics

  • Requires 1 remote to engage metering system
  • Requires 2nd remote for optional hydraulic boom fold
  • Requires additional remotes for optional hydraulic drives for fan and/or metering

Chassis

  • Tandem walking beam
    • Adjustable axle width with available tires: 16.5L x 16.1 (81-99 in.) or 9.00 x 20 (72-90 in.)
    • 2.5 in. axles with 6 bolt hubs
  • Single axle
    • 550/60-22.5 tires/12 ply at 90 in. center to center
    • Tire Dimensions – width 550 mm (21.7 in.)/OD – 1238 mm (48.7 in.)
    • 2.75 in. axles with 8 bolt hubs

Options

  • Herbicide kit includes 1 set of 28 groove metering rollers and fan intake reducer for metering finer products and lower rates
  • Foam or disc marking systems
  • Extension kit to extend 36 ft. boom to a 38 ft. spread
  • Hydraulic boom fold
  • Hopper screen assembly

Dimensions/Shipping Information

  • Height: 8 ft. 6 in.
  • Width: 8 ft. 6 in. (9 ft. 2 in. with single axle)
  • Length: 17 ft. 3 in.
  • Weight: 4360 lb.

245 Pull-Type Specifications245
Hopper

  • 40 cu. ft.
  • Mild steel with 2 component epoxy primer and 2 component cross linked acrylic top coat paint system
  • Weather tight lid
  • Product level sight gauge
  • Hopper bottom shut-off gates

Booms

  • 50 ft. spread, breakaway tips
  • Self levelling
  • Manual fold
  • 1.5 in. OD tubes, 12 outlets per side

Metering

  • Ground driven
  • Half shut off on either side
  • 28 groove plastic fluted metering roller – 12 groove available for more coarse material or higher rates
  • In-cab electric clutch control and air manifold monitor
  • 60 speed gearbox with 5% between settings
  • Air manifold and venturi system drop for easy cleaning

Fan

  • Hydraulic drive:10.5 GPM – hydraulic lines to hitch included
  • 11 HP gas engine fan drive
  • PTO: 540 or 1000 RPM with 540 RPM PTO shaft standard
  • 18 in. impeller with 4 in. outlet
  • Operates at 3200-4000 RPM

Chassis

  • 6000 lb. rubber torsion axle
  • 6 bolt hubs
  • 12.5 L – 15 in. tires

Options

  • 12 groove roller assemblies for coarse material

 

 

 

 

ST-6 Strip Till Granular Fertilizer Applicator
Specifications
st 6
Hopper

  • 185 cu. ft., 6 ton capacity
  • 409 stainless steel with a 2 component epoxy primer and a 2 component cross-linked acrylic top coat
  • Product level sight gauge
  • Easy to use lid on linkage and track opener
  • Opening size – 51 in. wide x 37 in. deep
  • Available bin screen
  • Hopper bottom shut-off slide gates
  • Standard mounting legs and hardware – may require modification by customer

Fan

  • Single inlet radial blade with 18 in. impeller
  • Operates at 5500 RPM
  • Fan outlet pressure of 32 in. water column
  • 12 CC displacement hydraulic, axial piston motor
  • 17 GPM hydraulic flow, case drain required
  • 1800 PSI
  • 16 HP

Metering and delivery system

  • Individual venturi, open feed system
  • (2) 304 stainless steel metering assemblies
  • 8, 12 or 16 outlets
  • 4 in. diameter, 12 groove, 304 stainless metering roller
  • 400 lb./acre @ 6 MPH at 30 in. row spacing
  • 40-650 lb. per acre metering range
  • 2 in. ID flex hose
  • 60 speed gearbox at 5% increments, or hydraulic motor metering drive for use with VRT
  • Optional Rawson AccuRate® drive with hydraulic lines on hopper compatible with most GPS systems
  • Optional air diffuser kit available for 8, 12 or 16 rows

Dimensions

  • Height of 84 in.
  • Width of 94 in.
  • Depth: 80 in. hopper, 102 in. overall including ladder and platform
  • Weight (empty) of 1510 lb.

 

 

 

 

 

About Us       Store Locations     Monthly Special     Newsletter      Catalog        Our Partners       Contact Us

1040 W. Charter Way | Stockton, California 95206 | 800-922-7253 • 209-464-9493 | Fax 209-464-7386
3766 S. Bagley Avenue | Fresno, California 93725 | 800-532-0253 • 559-486-4744 | Fax 559-486-3965
4285 Gila Ridge Road | Yuma, Arizona 85365 | 800-752-2636 • 928-317-2670 | Fax 928-317-2671